Product ID:21-6-9 CORROSION & HEAT RESISTANT WELD WIRE
MSDS Date:06/01/1993
FSC:3439
NIIN:00F051914
MSDS Number: CCFYV

UNITED STATES WELDING CORP

3579 HWY 50 E SUITE 104
CARSON CITY, NV 89701-2826
US

Emergency Phone: 702-883-7878

Info Phone: 818-341-2021

Cage: 58401

UNITED STATES WELDING CORP

CARSON CITY, NV 89701-2807 US

Telephone: 775-883-7878

Cage: 58401

IRON *96-3*

CAS: 7439-89-6

RTECS: NO4565500

MANGANESE *96-3*

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 9%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM (DUST)

CHROMIUM METAL, CHROMIUM, CHROME (CARCINOGEN BY NTP; IARC

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20%

ACGIH TLV: 0.5 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SUSPECTED ANIMAL/HUMAN CARCINOGEN BY IARC GROUP 2B,

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 6.5%

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.05 MG/CUM IC

NITROGEN

CAS: 7727-37-9

RTECS: QW9700000

Fraction By Weight: 0.27%

ACGIH TLV: ASPHYXIANT

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: SHORT TERM OVEREXPOSURE
MAY RESULT IN IRRITATION OF NOSE & THROAT. TOXIC GASES MAY CAUSE
PULMONARY EDEMA, ASPHYXIATION & EXCESSIVE EXPOSURE CAN BE FATAL.
MAY RESULT IN NEUROLOGICAL DAMAGE, LUNG FIBROSIS,
PNEUMOCONIOSIS/OTHER LUNG DISEASES.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:DISCOMFORT, DIZZINESS, NAUSEA, DRYNESS,
IRRITATION, WATERY EYES, HEADACHE, BREATHING DIFFICULTY, COUGHING,
CHEST PAINS
Medical Cond Aggravated by Exposure:PERSONS W/IMPAIRED PULOMARY
FUNCTION, AIRWAY DISEASES & CONDITIONS SUCH AS ASTHMA, EMPHYSEMA,
CHRONIC BRONCHITIS.

First Aid:EYES: IMMEDIATELY WASH W/LARGE AMOUNTS OF WATER. SKIN: WASH
W/SOAP/MILD DETERGENT FOR 5 MINS. INHALATION: REMOVE FROM EXPOSURE,
GIVE OXYGEN/CPR IF NECESSARY. IF PULSE NOT DETECTED, BEGIN EXTERNAL
HEAR T MASSAGE. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:USE FIRE FIGHTING METHODS APPROPRIATE FOR THE
SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:MOLTEN METAL ALLOYS MAY EXPLODE ON
CONTACT W/WATER, THEY MAY ALSO REACT VIOLENTLY W/WATER, RUST &
CERTAIN METAL OXIDES: (OXIDES OF COPPER, IRON & LEAD).

Spill Release Procedures:IN SOLID FORM THIS MATERIAL POSES NO SPECIAL
CLEAN-UP PROBLEMS.

Respiratory Protection:USE NIOSH APPROVED RESPIRATORS.
Ventilation:LOCAL EXHAUST SHOULD BE USED TO CONTROL EXPOSURE TO
AIRBORNE FUMES WHENEVER POSSIBLE.
Protective Gloves:FLAMEPROOF WELDING GLOVES
Eye Protection:SAFETY GLASSES, UNDER WELDING HELMET
Other Protective Equipment:APRON FOR WELDING, ANSI STD Z49.1, SAFETY IN
WELDING & CUTTING.
Work Hygienic Practices:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.
Supplemental Safety and Health

Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS FILLER METAL

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:METAL FUMES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.